Silicone Hydrophobic Powder | SHP
Typical Property:
Appearance |
White free flowing powder |
Silicone Content(%) |
50 min |
Bulk Density (g/l) |
550~600 |
Moisture Content (%) |
2.0 max |
Package |
10kg, 15kg or 25kg/bag. |
Silicone hydrophobic powder is highly efficient, silane-siloxance based hydrophobic powder agent, which is composed silicon active ingredients enclosed by protective colloid.
Instruction for use:
Package into finished products after mixing with other dry powder components evenly, and use it after mixing with the recommended amount of water on site. The recommended dosage is 0.2%-0.5% by weight of dry powder, which will hardly affect the compressive strength of the material.
Advantages:
Supplied as free-flowing granules, which are easily mixed dry.
Easily blended into material formulations during manufacturing or used as an admixture at the job site.
Adds hydrophobic properties to both exterior and interior cement-based materials, including concrete, cement, joint fillers, stucco, EIFS, plaster, grout, mortar, and etc.
Delivers longer-term performance than stearate-based powders.
Storage Conditions of Silicone Hydrophobic Powder:
Silicone hydrophobic powde is recommended to store in a dry place below 30 degree Celsius, avoiding moisture and direct sunlight, and use it within 12 months. If the product is not used up, the packaging must be tightly sealed to prevent moisture intrusion.
Applications:
Tile Grout.
Block Joint Mortar.
Waterproofing mortar.
Decorative mortar.
Self-leveling Compound.
And more.